HIGHLOGO 2-00 E
JP47996| Mechanical data | |
|---|---|
| Type | Duplex units without level control |
| HxWxL[mm] | 275 x 250 x 155 |
| Weight | 4 kg |
| Extension for accessory | optinoal |
| Main switch | optinoal |
| Electrical data | |
|---|---|
| Voltage | 1/N/PE~230 V |
| Pre-fuse | 20 A |
| Type of enclosure | IP 44 |
| Alarm buzzer | Yes |
| Connection 9V battery | Yes |
| Connection thermal contact | Yes |
| Connection dry run protection | Yes |
| Display operation hours/switching cycles | Yes |
| Display amps | Yes |
| Automatic alternate operation | Yes |
| Digital signal contact | optinoal |
| Input AUX | Yes |
| Event memory | Yes |
| Integrated GSM-Modem | optinoal |
| Max. switching power | 4 kW |
| Motor protection typ | Motor protection switch |
| Peak load operation | Yes |
| Start | direct |
| Fault contact 230 V | Yes |
| Fault contact pot. Free | 2 changeover contacts, 5A |
Accessories BmG/immersion sensor
| Electrical accessory | ||||||
|---|---|---|---|---|---|---|
| Code No. | ||||||
 | Rechargeable battery | |||||
| 9 V, for mains independent alarm | JP44850 | |||||
| Level control | |||||
| Subm. switch pack B | 3 subm. ball contact switch with 9.5 m and fixing devices | JP16725 | ||||
| Subm. switch pack BmG | 3 subm. ball contact switch with 9.5 m and counterweight | JP16726 | ||||
| Submersible switch pack BHmG | Submersible ball contact switch 9.5 m with counterweight | JP24769 | ||||
| Auxiliary switch unit ExH-B for explosion-proof pumps only | for ex-proof pumps only (duplex units) | JP00295 | ||||
| Submersible probe (10 m) | for analogue water level indicator (4-20 mA) | JP44808 | ||||
| Weight | to stabilize the subm. ball contact switch | JP44803 | ||||
| Smart Home | ||||||
| FTJP radio transmitter | JP47209 | |||||
| Pre-mounted level control | ||||||
| Pressure sensor set (10 m) | for analogue water level display with tube set | JP26187 | ||||
| Pressure switch (10 m) | with pressure sensor and tube set | JP26196 | ||||
| Pre-mounted accessory | ||||||
| GSM battery fpr HighLogo 2 | 12V, for duplex units, factory fitted incl. housing extension | JP49357 | ||||
| Main switch | 15 kW, factory fitted only | JP48002 | ||||
| Modem GSM for HighLogo | factory fitted, incl. flat antenna | JP49356 | ||||
| Parametrization GSM modul | pre-setting for customer demand | JP55202 | ||||
| Retrofittable accessory | |||||
| Modem GSM for HighLogo | retrofit unit incl. GSM antenna | JP50444 | ||||
| Battery 12V with housing | retrofit unit for independent modem operation | JP50635 | ||||